Heat Emission from Pipe Heating
Temperature & Pipe Configuration
°C
°C
mm
pipes
m
W/m²K
Maximum Heat Emission
64.0
W/m²
Maximum heat output based on pipe configuration and temperature settings
Note: This is the theoretical maximum heat emission based on the pipe configuration and temperatures. Actual values may vary depending on air circulation, pipe coating, and other environmental factors.
Energy Prices (Netherlands)
Real-time hourly electricity prices from EnergyZero API
Current Price
Loading…
--
€/MWh (incl. BTW)
--
Today's Summary
Lowest
--
--
Highest
--
--
Average
--
€/MWh
Status
--
--
Hourly Prices
Today
Loading prices…
Price Chart — Today
Realized (imbalance) prices come from ENTSO-E, which publishes them with a ~1–2 day delay — so they are not available yet for this day. The expected (day-ahead) and forecast lines are unaffected.
Realized vs Day-ahead
Avg deviation
--
€/MWh · realized − expected
Total cost / saving
--
€ · assumes 1 MWh/h flat use
Worst hour
--
--
Forecast bias
--
€/MWh · day-ahead − yesterday
Negative = realized below expected (your day-ahead plan held up). Positive = imbalance overshoot. Forecast = yesterday's prices shifted onto this day's hours.
Tip: Plan high-energy operations (lighting, heating, irrigation pumps) during the lowest price hours to reduce costs. Prices are updated every 5 minutes from EnergyZero.
WKK Optimization (Combined Heat & Power)
Optimize CHP operation based on electricity prices, CO₂ demand, and operational costs
Electricity now
--
€/MWh
Gas now
--
€/m³
Configure CHP units and click "Run Optimization"